Wires
Stainless Steel TIG Wire
 We
manufacture the highest quality TIG Wires in Stainless Steel
Our wire is Bright Drawn and specially cleaned to avoid all possible
contamination.
It is then straightened and cut with standard diameter and length
Standard Sizes
| Dia in mm |
1.2 |
1.6 |
2.0 |
2.4/2.5 |
3.15 |
4.0 |
4.6 |
5.0 |
| Dia in inches |
0.045 |
0.062 |
0.080 |
0.093 |
0.125 |
0.156 |
0.1875 |
0.200 |
Length :
Available in 500 mm & 1000 mm standard length
Identification
Each wire is embossed at one or both ends with grade & size
and labeled on packages with type (grade), size, quality & batch
/ lot number
Packaging
5 kgs wire primarily packed in plastic/ corrugated tube further
packed in card board box and finally packed in wooden boxes.
Grades: ER 304L,ER 307, ER 308 ,ER 308L,ER 309,
ER 309L,ER 309 L Mo, ER 310, ER 312,ER 316,ER 316L,ER 347,er 430L,
Stainless Steel
MIG
 We
manufacture highly polished, clean, precision layer wound /random
layer
wound MIG Welding Wires. The material is manufactured to the best
quality standards in terms of surface finsh, diameter tolerances,
cast helix and Tensile Strength.
Standard Sizes
| Dia in mm |
0.60 |
0.80 |
0.90 |
1.0 |
1.1/1.2 |
1.60 |
| Dia in inches |
0.025 |
0.030 |
0.035 |
0.040 |
0.045 |
0.062 |
Identification
Each spool and carton are labeled with type (Grade), size, quantity
and
batch / lot number
Packaging
Each spool is packed in a plastic bag and subsequently into strong
carton
box to prevent damage during transit or storage. These Boxes are
further packed in Wooden or MS pallets. We can Offer Spools of 5
Kgs(10Lbs), 12.5/15 Kgs(25 Lbs) with Layer Winding or Random Winding
as per the Customer's Specifications
Grades: ER 304L,ER 307, ER 308 ,ER 308L,ER 309,
ER 309L,ER 309LMo, ER 310,ER 316,ER 316L,ER 347,er 430L
Copper Coated
(CO2) Wire
1) Classification: AWS A5.15 ER 70S-6 Typical
Wire Analysis
| C |
Mn |
Si |
S |
P |
| 0.08 MAX |
1.45 MAX |
0.80 MAX |
0.030 MAX |
0.025 MAX |
2) Classification: AWS A5.18 ER 70S-2 Typical
Wire Analysis
| C |
Mn |
Si |
S |
P |
Ti |
Zr |
Al |
| 0.70 MAX |
0.90 TO 1.40 |
0.40 TO 0.70 |
0.030 MAX |
0.025 MAX |
0.05 TO 0.15 |
0.020 TO 0.12 |
0.05 TO 0.15 |
3) Classification: AWS A5.28 ER 80S-B2 Typical Wire
Analysis
| C |
Mn |
Si |
S |
P |
Ni |
Cr |
Mo |
Cu |
Other Elements Total |
| 0.70 TO 0.12 |
0.40 TO 0.70 |
0.40 TO 0.70 |
0.025 MAX |
0.025 MAX |
0.20 MAX |
1.20 TO 1.50 |
0.40 TO 0.65 |
0.35 |
0.50 |
4) Classification: AWS A5.28 ER 90S-B3 Typical
Wire Analysis
| C |
Mn |
Si |
S |
P |
Ni |
Cr |
Mo |
Cu |
Other Elements Total |
| 0.70 TO 0.12 |
0.40 TO 0.70 |
0.40 TO 0.70 |
0.025 MAX |
0.025 MAX |
0.20 MAX |
2.30 TO 2.70 |
0.90 TO 1.20 |
0.35 |
0.50 |
5) Classification AWS: SFA 5.28 ER 90SG Typical Wire Analysis
| C |
Mn |
Si |
S |
P |
Mo |
Cu |
| 0.80 |
1.60 To 1.70 |
0.50 To 0.80 |
0.025 |
0.025 |
0.40 To 0.60 |
0.20 To 0.40 |
MIG Wire Standard Sizes:
| Dia in mm |
0.60 |
0.80 |
0.90 |
1.0 |
1.1/1.2 |
1.60 |
| Dia in inches |
0.025 |
0.030 |
0.035 |
0.040 |
0.045 |
0.062 |
 Packing
:
12.5/15 Kgs precision layer wound or Random Wound (as per
Customer's requirements) on Plastic Spool, Further Shrink Wrapped
and then heat sealed i heat sealed in polythene bags with silica
gel and further packed in cardboard box.
2) TIG Wire Standard Sizes
| Dia in mm |
2.0 |
2.4/2.5 |
3.15 |
4.0 |
| Dia in inches |
0.080 |
0.093 |
0.125 |
0.156 |
Length :
Available in 500 mm & 1000 mm standard length
Identification :
Each wire is embossed at one or both ends with grade & size
and labeled on packages with type (grade), size, quality & batch
/ lot number
Packaging:
5 kgs wire primarily packed in plastic/ corrugated tube further
packed in card board box and finally packed in wooden boxes.
 |
